the best razor barbed wire/razor wire

razor barbed wire/razor wire/galvanized barbed wire
Materials:stainless steel
Number:BTO-12,BTO-18,BTO-22
Diameter:450,500,
Razor coil is a registered trademark of BOUNDARY FENCE & RAILING SYSTEMS, INC. We manufacture two types of razor coil - Galvanized & Stainless Steel. The loops are normally not clipped together in concertina fashion. This allows the razor coil to be installed in any distance between loops, depending on the security desired, the most common being 18” or 450 mm.

Razor coil is manufactured in 3 diameters - 18” - 24” - 36” (450-600-750 MM). It is fabricated from A 1” (26MM) wide and 0.020 (0.50 MM) thick strip of G 90 galvanized material or 430 stainless steel. Clusters of 4 needle sharp barbs are located 4” (100 MM) on center around each coil loop. Each barb is 1.2 when measured from the center of the cluster. The coil is cold pressed 230o around A 0.091 (2.3 MM) diameter high tensile galvanized or stainless steel core wire.

When ordering the concertina each loop shall be clipped the adjacent loop 3- 5 -7 or 9 times equally spaced around the circumference to provide the concertina effect. The clips are made of 0.065” X 0.0375 stainless steel capable of withstanding a minimum pull load of 200 LBS

BOUNDARY'S RAZOR COIL SIZES & SPECIFICATION
PRODUCT
NAME
DIAMETER
LOOPS/ COIL
CLIPS / LOOP
WEIGHT/ ROLL
LENGTH PER ROLL***
(APPROXIMATE)

inches
Ø
mm
Ø


lbs
kg
ft
m
RAZOR COIL
18”
450
33
0
10.00
4.54
50' AT 18”
15m at 450mm
RAZOR COIL
24”
600
33
0
15.00
6.80
50' AT 18”
15 AT 450 MM