Galvanized Razor wire flatwrap coils

Razor wire flatwrap coils:
1.Wire diameter:0.2-4.0mm
2.Barb distance:1.96"--5.90"
3.single twist type
4.ISO900
Razor wire flatwrap coils

Razor wire flatwrap coils
is made of high tensile razor wire, clapped into a flat panel formation.
Installation Forms
Flatwrap coils can be used in the following forms:
Installed against the existing smooth wire mesh fence;
Fitted to the welded mesh fence;
Fitted by overlapping the fence mesh;
Installed to the brick wall directly.
Advantages:
Flatwrap coils will substantially improve the effectiveness of the fence. Installed on this basis, innocent persons are protected from injury by the smooth wire mesh fence while the potential intruders will get frightened back.
The flat coils provide a neat but effective barrier when used together with mesh fences.
Flatwrap coil installation is particularly simple when it is fitted by overlapping the fence mesh.
It provides a high barrier when mounted to the wall.
Installation of razor wire flatwrap coils
is particularly simple when it is fitted,
shown here.
500 mm high flatwrap fitted to our
welded mesh fence provides a neat
but effective barrier.
Installation of razor wire flatwrap
coilsis particularly simple when it
is fitted by overlapping the fence mesh
Razor Wire Flatwrap Coils
Razor Wire Flatwrap Coils
Razor Wire Flatwrap Coils

Razor Wire Flatwrap Specifications - Standard Coil Sizes
Height
Length
Weight
500 mm (20 in)
15 m (50 ft)
9.5 kg (21 lbs)
700 mm (28 in)
15 m (50 ft)
13 kg (29 lbs)
900 mm (36 in)
15 m (50 ft)
14.5 kg (32 lbs)